srpski       english





Directly Heated Triode Single Ended
Monaural Power Amplifier


Features
   The adequate 10W output of the 300B provides full-bodied musical reproduction that you will appreciate for a long, long time.

Desing Features
   The input source signal is fed directly to the grid of first input tube the 6SN7. An additional 6SN7 tube functions as a current source and low impedance driver to the 300B output tube.
   There is a direct heated 5U4 NOS (USA) dual diode in power supply.
   Our Transformer are EI Laminate, Bi Filler, Tri-Filler Wound, 120mA, Air Gap, 25W.
   The 300B heaters are supplied from a well filtered DC source to minimize hum and noise.
   We are confident that the authoritative musical reproduction of the SE 300B will satisfy the most critical appraisal of the audiophile.


 
Specification


Effective power .............................................................................. 10W
Frequency range............................................................. 15Hz - 34kHz
Input sensitivity ............................................................................... 0,7V
Input impedance .........................................................................100kΩ
S/ N ratio .........................................................................................80dB
Power supply ....................................................... 230 VAC 50 ~ 60Hz
Power consumption ................................................................... 700W
Load impedance .................................................... 8Ω (4 Ω optional)
External dimensions .............................. 220W x 490D x 255H mm
Weight.......................................................................................... 13,8kg